XGATE application and working principle of the asynchronous serial communication

induction motor rotor electronic parts 

Specifications
1.20 years manufacturing experience 
2.competitive price,high quality 

3.Delivery Detail:within 10 days after receiving deposit 
As with SPI, XGATE can be bit operation through direct counterpart or general asynchronous receiver- transmitter to control software SCI. This is similar to the original function of synchronous communication, of course, critical bit clock edges water pump price are not the same. XGATE coding in the asynchronous serial communication electric motor parts is strictly limit (maximum baud rate usually 19, synchronous generator 200 b/s). Under the condition of maximum response time must keep the baud rate of 20% and 2% of the total, namely every 10.4 mu s for generator price each sample or set up one more time. Although the processing time is allowed to change, but under the baud rate of 19, 200 b/s is not in the sending and receiving the correct 8 bits of data on conflict. XGATE coding send SCI data needs to be generated by a timer compare two fixed duration: one is a cycle; 

Totally Enclosed Protect Feature and Three-phase Phase low rpm ac electric motor
Specifications
power range: 0.12-18.5 kW 
Centre height of frame: 63-160 mm 
Rated Voltage: 380 V 
Rated Frequency: 50Hz or 60Hz 

Packaging Details:80-112 carton box 132 and above plywood box
The other is a breakpoint detection time, usually ac synchronous generator for many bits cycle time. One in the transport Electric motor process is very short, only need ac induction motor to set up lamination a pointer to electric motor low rpm the output state and change. Receive data requirements with a cycle time sampling was carried out on the middle passage, and this will interrupt apart before, like entered another XGATE interrupt, disrupt rate doubled. In addition, this program is very short, in the worst case between interrupt (send/receive, 19 200 baud rate for the b/s) of the interval is 26 mu s; Under the influence of the XGATE clock program (19 200 baud rate for the b/s), SCI before send and receive data, allowing a program about 36 mu s (+ 10.4 mu s allow delay. 26). This is a when XGATE program to join, how to meet the maximum delay and allows other applications to perform good example.